All dimensions are given in millimetres (mm), if not stated otherwise.
The values Cr, Cor or Ca, Coa are given in kilonewtons (kN).
Limiting speed frequency is understood in min-1.
Dimensions | Basic Load Rating | Designation | Weight | |||||||||
d | D | B | B1 | D1 | s | r1,2 min |
r3,4 min |
a | dynamic Cr |
static Cor |
[kg] | |
25 | 55 | 20 | 28 | 62 | 1 | 26.8 | 19.2 | 15.5 | PLC 14-26 | 0.28 | ||
25 | 65.5 | 25.4 | 16.5 | 74 | 4.4 | 1.1 | 40 | 30.4 | 26.6 | PLC 15-2 | 0.466 | |
30 | 60 | 37 | 2.5 | 0.5 | 50.5 | 36.9 | 30.4 | PLC 14-25 | 0.45 | |||
34 | 64 | 37 | 2.8 | 0.3 | 53.5 | 36.9 | 31 | PLC 14-24 | 0.32 | |||
35 | 68 | 37 | 2.5 | 0.3 | 50.5 | 39.8 | 38.3 | PLC 15-12 | 0.534 | |||
37 | 72 | 37 | 2.8 | 0.3 | 57 | 43.8 | 39.8 | PLC 15-22 | 0.55 |
PLC 15-2 | Bearings with steel sheet cage centered by balls. Originally these bearings are destined for mounting of shafts in motor vehicles transmissions housings. |
PLC 15-12 | Bearings with solid machined polyamide cage with filler, centered by balls, special sealing rings on both sides. Bearings filled by grease. Originally these bearings are destined for mounting of motor vehicles wheels. |
Este material ha sido impreso desde el sitio web de ZKL Rodamientos Argentina - www.zklgroup.com.ar